Hama LED bulb, GU10, 230lm repl. 35W, reflector PAR16, clear, warm white, dimmable
Energy-efficient, long-lasting LED illuminant with a power consumption of 3 watts as a replacement for a conventional 35-watt incandescent lamp: dimmable LED reflector lamp with plug-in socket in warm white
Is suitable for
| Colour Reproduction Index RA (min.) | 80 |
| Light Colour | Warm White |
| Beam angle | 36 ° |
| EAR Reg.No. | DE 38720470 |
| Energy Efficiency Class A to G | F |
| Input Voltage | 220-240 V |
| L70B50 lifetime for LED and OLED light sources | 25000 h |
| Lighting technology used | LED Lamp |
| Light source | Directional |
| Mains Frequency | 50/60 Hz |
| On-mode power (Pon): | 3 W |
| type of electricity | AC |
| Useful luminous flux (Φ90) | 230 lm |
| Can be Dimmed | Yes |
| Colour Temperature | 2700 K |
| IP protection class | IP20 (Dry Rooms) |
| Lamp socket | GU 10 |
| Optimal Ambient Temperature | 25 °C |
| Power Consumption of an Equivalent Incandescent Lamp | 35 W |
| Design / Diameter / Height | Reflector PAR16 / 50 mm / 54 mm |
| Net Weight | 41 g |
| Lamp Current | 16 mA |
| EPREL_registration number | 2469071 |
- Energy-efficient, long-lasting LED illuminant with a power consumption of 3 watts as a replacement for a conventional 35-watt incandescent lamp: dimmable LED reflector lamp with plug-in socket in warm white
- Warm white light for a cosy atmosphere
- Reliable colour reproduction for everyday applications
- Clear cover for maximum transparency
- Narrow beam angle for focussed light with accent and spotlighting
- LED illuminant for use in recessed spots, downlights etc.
- 100% brightness immediately after switch-on without warm-up time or flickering
- 1 LED bulb
The LED light is designed for operation in open luminaires: the heat generated by the illuminant during operation can therefore be emitted into the surroundings. The service life prognosis is based on this mode of operation. The service life is reduced by insufficient cooling when used in enclosed luminaires. Only use in lights intended for its use. Allow the illuminant to cool down completely before changing it and switch off the power supply voltage. Damaged illuminants should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
Some dimmers can impair the function of the light (flickering, noise).
Mixed operation, i.e. the simultaneous operation of LED bulbs and standard incandescent bulbs or LED bulbs of different types on one dimmer cable, is not possible. If noises are heard with dimmers that were not noticed with incandescent lamps: the dimmer is not suitable for LED bulbs.
Cable dimmers (dimmer integrated into the power cable) require a separate on / off switch since they may not be able to regulate right down to 0.
Note the dimmer's minimum load, otherwise it may not switch on or it may control the light incorrectly. Simple dimmers usually work from 60W to 400W.
With integrated dimmers that have a basic brightness setting, this must be set high enough otherwise the LED bulb may not switch on.
Dim slowly and evenly. Do not dim quickly or with jerky movements.
Only incandescent bulb dimmers are permitted - not dimmers for transformers, etc.
Touch dimmers are usually not suitable. Incorrect dimmers can permanently damage lighting.
