Hama LED bulb, E14, 1050lm replaces 75W, stick, matt, neutral white
Energy-efficient, long-lasting LED illuminant with a power consumption of 10 watts as a replacement for a conventional 75-watt incandescent lamp: rod-shaped LED bulb with E14 socket in matt and neutral white
Is suitable for
| Colour Reproduction Index RA (min.) | 80 |
| Light Colour | Neutral White |
| EAR Reg.No. | DE 38720470 |
| Energy consumption in on-mode | 10 kWh/1000h |
| Energy Efficiency Class A to G | F |
| Input Voltage | 220-240 V |
| L70B50 lifetime for LED and OLED light sources | 25000 h |
| Lighting technology used | LED Lamp |
| Light source | Non-directiona |
| Mains Frequency | 50/60 Hz |
| On-mode power (Pon): | 10 W |
| type of electricity | AC |
| Useful luminous flux (Φ360) | 1055 lm |
| Can be Dimmed | No |
| Colour Temperature | 4000 K |
| IP protection class | IP20 (Dry Rooms) |
| Lamp socket | E 14 |
| Optimal Ambient Temperature | 25 °C |
| Power Consumption of an Equivalent Incandescent Lamp | 75 W |
| Design / Diameter / Height | Stick / 38 mm / 113 mm |
| Net Weight | 30 g |
| Lamp Current | 58 mA |
| EPREL_registration number | 2471818 |
- energy-efficient, long-lasting LED illuminant with a power consumption of 10 watts as a replacement for a conventional 75-watt incandescent lamp: rod-shaped LED bulb with E14 socket in matt and neutral white
- neutral white light for work and general lighting and constant brightness
- reliable colour reproduction for everyday applications
- clear cover for even, glare-free light distribution
- broad beam angle for the even illumination of larger areas
- LED illuminant for use in chandeliers, wall and ceiling lights, etc.
- 100% brightness immediately after switch-on without warm-up time or flickering
- 1 LED bulb
The LED bulb should only be used in lights intended for its use. Before changing the light, allow it to cool down completely and switch off the power supply voltage. Damaged lights should be replaced immediately. No liability shall be assumed for damage caused by incorrect use. The LED light is designed for operation in open luminaires. The heat generated by the illuminant during operation may be emitted into the surrounding area. The predicted service life is based on this mode of operation. LED lights can, of course, also be used in enclosed luminaires, however their service life will be reduced by insufficient cooling. Non-dimmable!
