Hama LED filament bulb, E14, 470m repl. 40W, candle C35, clear, neutral white, dimmable
Energy-efficient, long-lasting LED illuminant with a power consumption of 2.9 watts as a replacement for a conventional 40-watt incandescent lamp: dimmable LED filament in candle shape with E14 socket in neutral white
Is suitable for
Highlights
Energy efficiency class C
LED illuminants with good energy efficiency: reduce power consumption and lower energy costs
| Colour Reproduction Index RA (min.) | 80 |
| Light Colour | Neutral White |
| EAR Reg.No. | DE 38720470 |
| Energy consumption in on-mode | 3 kWh/1000h |
| Energy Efficiency Class A to G | C |
| Input Voltage | 220-240 V |
| L70B50 lifetime for LED and OLED light sources | 15000 h |
| Lighting technology used | LED Lamp |
| Light source | Non-directiona |
| Mains Frequency | 50/60 Hz |
| On-mode power (Pon): | 2.9 W |
| type of electricity | AC |
| Useful luminous flux (Φ360) | 470 lm |
| Can be Dimmed | Yes |
| Colour Temperature | 4000 K |
| IP protection class | IP20 (Dry Rooms) |
| Lamp socket | E 14 |
| Optimal Ambient Temperature | 25 °C |
| Power Consumption of an Equivalent Incandescent Lamp | 40 W |
| Design / Diameter / Height | Candle C35 / 35 mm / 98 mm |
| Net Weight | 19 g |
| Lamp Current | 22 mA |
| EPREL_registration number | 2471655 |
- Energy-efficient, long-lasting LED illuminant with a power consumption of 2.9 watts as a replacement for a conventional 40-watt incandescent lamp: dimmable LED filament in candle shape with E14 socket in neutral white
- neutral white light for work and general lighting
- Reliable colour reproduction for everyday applications
- filament bulb in high-quality glass design with classic incandescent lamp character
- Clear cover for maximum transparency
- Broad beam angle for the even illumination of larger areas
- LED filament bulb for use in chandeliers, wall and ceiling lights, etc.
- 100% brightness immediately after switch-on without warm-up time or flickering
- 1 LED filament bulb
The LED filament bulb is designed for operation in open luminaires: the heat generated by the illuminant during operation can therefore be emitted into the surroundings. The service life prognosis is based on this mode of operation. The service life is reduced by insufficient cooling when used in enclosed luminaires. Only use in lights intended for its use. Allow the illuminant to cool down completely before changing it and switch off the power supply voltage. Damaged illuminants should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
Some dimmers can impair the function of the light (flickering, noise).
Mixed operation, i.e. the simultaneous operation of LED bulbs and standard incandescent bulbs or LED bulbs of different types on one dimmer cable, is not possible. If noises are heard with dimmers that were not noticed with incandescent lamps: the dimmer is not suitable for LED bulbs.
Cable dimmers (dimmer integrated into the power cable) require a separate on / off switch since they may not be able to regulate right down to 0.
Note the dimmer's minimum load, otherwise it may not switch on or it may control the light incorrectly. Simple dimmers usually work from 60W to 400W.
With integrated dimmers that have a basic brightness setting, this must be set high enough otherwise the LED bulb may not switch on.
Dim slowly and evenly. Do not dim quickly or with jerky movements.
Only incandescent bulb dimmers are permitted - not dimmers for transformers, etc.
Touch dimmers are usually not suitable. The wrong dimmer switch can damage the bulb.
